Weir Hot Rod Products
Home
About Us
A Hot Rod T56
Project Gallery
Image Gallery
Contact Us

T-56 LT1 or LS1 OEM Conversion Kit
Available NOW for Buick, Olds, Pontiac.
Made in USA

animgif2.gif

WHAT YOU GET IN THE KIT
356 T6 Cast Aluminum Heat Treated Bellhousing
Self Adjusting Hydraulic Release Bearing Assemble
Steel Block Plate
Pressure and Bleed Tubing
All Necessary Bolts


WHAT IT’LL DO
Adapt your OEM T56 to any V8 Chevy 1955-2003 that has the standard bolt pattern. It will also fit 4 cyl., 6 cyl. and V6 engines that have the same bellhousing pattern. The kit will allow the use of performance flywheel and clutch combo that will fit your engine.
The clutch disc must have 1 1/8 - 26 spline hub to fit the T-56 trans., this is a common disc available in 10" thru 11" sizes. The flywheel can be up to 168 teeth and in most cases your existing block mounted starter will work. The release bearing will operate with any 1” bore master cyl. that can be mounted on your car. The drive shaft will need to be shortened about 2 ½” - 3" depending on your existing trans.

Weir Hot Rod Products
Order Line (800) 633 9869  Tech Line (707) 647 0513
Fax (707) 642 4446